Whittle & Wedge Outdoor Picnic Table
Enjoy the outdoors with your easy-to-assemble Picnic Table. Crafted from uniquely beautiful Lawson Cypress, your 6-foot table with two attached benches kit includes all the pre-drilled and cut components along with hardware for your easy build. Lawson Cypress naturally contains Cypressine, which is anti-bug and anti-bacterial. Add a water sealer to promote the longevity of your Whittle & Wedge Outdoor Picnic Table.
Whittle & Wedge Picnic Table
by Sonoma Milling Company
Assembly Instructions
- Remove the packaging and all the components from the tabletop. Assembly will be completed with the tabletop upside down.
Legs:
Components: 4
Hardware: 8 Bolts/Washers/Nuts
- Locate all four table legs and position each leg inside the 2×2 on each end of the table. Both holes should be in line with the holes in the 2×2 and the leg should extend outward. Next, secure the legs by applying the carriage bolts provided through each hole. Lock the bolts into place by taping the head of the bolt with a hammer and fastening with a washer and nut.
Crossmembers:
Components: 2
Hardware: 4 Bolts/Washers/Nuts
- Attach both horizontal crossmembers on each end of the table from the middle of one leg to the next with the angle side positioned upward (Towards the ground once the table is flipped right side up). Insert and secure Carriage Bolts in all four designated holes on each end.
Knee Braces
Components: 2
Hardware: 4 Screws
- Attach each knee Brace by first locating the center point of each crossmember. The 45-degree angles should fit between the support bracket of the table (2×2’s located near center of tabletop) and the crossmember. The angles should fit flush against each component, this provides stability and a true 90-degree angle from the tabletop to the table base. Fasten a screw with the screws provided in the predrilled holes of each end of the Knee Brace with a drill.
- Flip the table right-side up.
Benches
Components: 2
Hardware: 8 Screws
- Secure the benches by lining up each end to the crossmembers. The bench seats are then secured by fastening the screws provided in the predrilled holes on each end of the bench.
Enjoy!
